$40,000.00 Original price was: $40,000.00.$38,000.00Current price is: $38,000.00.
The Amrocor 130 kW Industrial Generator Set is engineered for high-performance, dependability, and versatility across standby, prime, and continuous power applications. Powered by a Volvo Penta Engine, paired with a Stamford Alternator and a Deepsea Control Panel, this generator set is designed to meet diverse power needs while maintaining robust efficiency and durability.
Power Mode | Power Output | Voltage | Frequency | Phase |
---|---|---|---|---|
Prime Power | 127 kW | 240/120V | 60 Hz | 3-phase |
Standby Power | 146 kW | 240/120V | 60 Hz | 3-phase |
Specification | Detail |
---|---|
Model | TAD750GE |
Manufacturer | Volvo Penta |
Number of Cylinders | 6 Cylinders, Vertical Inline |
Cycle | 4-Stroke |
Aspiration | Wastegate Turbocharger |
Bore x Stroke | 108 mm x 130 mm |
Displacement | 7.15 L |
Compression Ratio | 18:1 |
Prime Power/Speed | 127 kW / 1800 RPM |
Standby Power/Speed | 146 kW / 1800 RPM |
Cooling System | Forced Liquid Cooling Cycle |
Fuel Consumption at 100% Load | 29 L/h |
Specification | Detail |
---|---|
Model | UCI274D CSA Approved |
Power | 130 kW |
Frequency | 60 Hz |
Exciter Type | Single Bearing, Brushless, Self-Excited |
Power Factor | 0.8 |
Voltage Regulation | ≤+1% |
Insulation Grade | H |
Protection Grade | IP23 |
Phase | 3 |
Specification | Detail |
---|---|
Model | DSE6020 |
Monitoring Parameters | Generator voltage, output frequency, engine speed, battery voltage, engine hours run |
Failure Indicators | Overspeed, emergency stop, low oil pressure, high water temperature, failure to start |
Shutdown Triggers | Low engine oil pressure, high water temperature, overspeed, failure to start after 3 attempts |
The Amrocor 130 kW Industrial Generator Set provides a comprehensive and reliable solution for both commercial and industrial power needs, ensuring uninterrupted power even in the most demanding conditions.
We process all orders within 24 hours of confirmation. Production times vary depending on the product and specific order requirements. To receive the most accurate lead time, please email us before placing your order so we can provide detailed information.
As a general guideline, estimated production times are as follows:
Oil: 6-8 weeks
Generators: 16-20 weeks
Transformers: 8-12 weeks
Switchgears: 8-12 weeks
Industrial Equipment: 8-12 weeks
Wiring & Cables: 2-4 weeks
While we strive to meet the estimated timelines, unforeseen factors may affect production and delivery schedules. We will make every effort to keep you updated throughout the process to ensure a smooth experience.
By placing an order, you agree to our terms and conditions, including any applicable production and shipping policies.
©2025. Amrocor All Rights Reserved.