$43,000.00 Original price was: $43,000.00.$40,850.00Current price is: $40,850.00.
The Amrocor 150 kW Industrial Generator Set is a fully integrated power generation system designed for exceptional performance, reliability, and versatility in standby, prime, and continuous power applications. Powered by a Volvo Penta Engine, Stamford Alternator, and Deepsea Control Panel, it offers advanced technology for industrial and commercial use.
Power Mode | Power Output | Voltage | Frequency | Phase |
---|---|---|---|---|
Prime Power | 150 kW | 240/120V | 60 Hz | 3-phase |
Standby Power | 166 kW | 240/120V | 60 Hz | 3-phase |
Specification | Detail |
---|---|
Manufacturer | Volvo Penta |
Number of Cylinders | 6 Cylinders, Vertical Inline |
Cycle | 4-Stroke |
Aspiration | Wastegate Turbocharger |
Bore x Stroke | 108 mm x 130 mm |
Displacement | 7.15 L |
Compression Ratio | 18:1 |
Prime Power/Speed | 149 kW / 1800 RPM |
Standby Power/Speed | 166 kW / 1800 RPM |
Cooling System | Forced Liquid Cooling Cycle |
Fuel Consumption at 100% Load | 216 g/kWh |
Lubrication Capacity | 20 L |
Specification | Detail |
---|---|
Model | UCI274 CSA Approved |
Power | 150 kW |
Frequency | 60 Hz |
Exciter Type | Single Bearing, Brushless, Self-Excited |
Power Factor | 0.8 |
Voltage Regulation | ≤+1% |
Insulation Grade | H |
Protection Grade | IP23 |
Phase | 3 |
Specification | Detail |
---|---|
Model | DSE6020 |
Monitoring Parameters | Generator voltage, output frequency, engine speed, battery voltage, engine hours run |
Failure Indicators | Overspeed, emergency stop, low oil pressure, high water temperature, failure to start |
Shutdown Triggers | Low engine oil pressure, high water temperature, overspeed, failure to start after 3 attempts |
The Amrocor 150 kW Industrial Generator Set is built to deliver consistent, efficient, and reliable power across diverse applications, ensuring seamless operations for both prime and standby power needs.
We process all orders within 24 hours of confirmation. Production times vary depending on the product and specific order requirements. To receive the most accurate lead time, please email us before placing your order so we can provide detailed information.
As a general guideline, estimated production times are as follows:
Oil: 6-8 weeks
Generators: 16-20 weeks
Transformers: 8-12 weeks
Switchgears: 8-12 weeks
Industrial Equipment: 8-12 weeks
Wiring & Cables: 2-4 weeks
While we strive to meet the estimated timelines, unforeseen factors may affect production and delivery schedules. We will make every effort to keep you updated throughout the process to ensure a smooth experience.
By placing an order, you agree to our terms and conditions, including any applicable production and shipping policies.
©2025. Amrocor All Rights Reserved.