The Amrocor AGS-1106D-E70TAG5 industrial generator set is a cutting-edge, fully integrated power generation solution designed for standby power, prime power, and continuous power applications. It combines the renowned Perkins Engine, Stamford Alternator, and Deepsea Control Panel for exceptional performance, reliability, and versatility.
Power Mode | Output Power | Speed | Overload Capability |
---|---|---|---|
Prime Power | 218 kW | 1800 RPM | 10% overload for 1 hour in 12 |
Standby Power | 228 kW | 1800 RPM | No overload permitted |
Specification | Detail |
---|---|
Model | 1106D-E70TAG5 |
Manufacturer | Perkins |
Cylinder Configuration | 6 Cylinders Inline |
Cycle | 4-Stroke |
Aspiration | Turbocharged and Aftercooled |
Bore x Stroke | 105 mm x 135 mm |
Displacement | 7.0 L |
Compression Ratio | 16.8:1 |
Prime Power / Speed | 218 kW / 1800 RPM |
Standby Power / Speed | 228 kW / 1800 RPM |
Speed Governor | ECM |
Cooling System | Forced Liquid Cooling Cycle |
Lubrication System Capacity | 21 L |
Fuel Consumption (75% Load) | 229.1 g/kW h |
Starter Motor | DC24V |
Specification | Detail |
---|---|
Model | UCI274 CSA Approved |
Output Power | 220 kW |
Frequency | 60 Hz |
Exciter Type | Single Bearing, Brushless, Self-Excited |
Power Factor | 0.8 |
Voltage Regulation | ≤+1% |
Insulation Grade | H |
Protection Grade | IP23 |
Phase | 3 |
Specification | Detail |
---|---|
Model | DSE |
Monitoring Parameters | Generator voltage, output frequency, engine speed, battery voltage, engine hours |
Failure Indicators | Overspeed, emergency stop, low oil pressure, high water temperature, failure to start |
Shutdown Triggers | Low engine oil pressure, high water temperature, overspeed, failure to start after 3 attempts |
The Amrocor AGS-1106D-E70TAG5 generator set is an all-in-one, high-performance power solution that ensures reliability and versatility for various industrial and commercial applications.
We process all orders within 24 hours of confirmation. Production times vary depending on the product and specific order requirements. To receive the most accurate lead time, please email us before placing your order so we can provide detailed information.
As a general guideline, estimated production times are as follows:
Oil: 6-8 weeks
Generators: 16-20 weeks
Transformers: 8-12 weeks
Switchgears: 8-12 weeks
Industrial Equipment: 8-12 weeks
Wiring & Cables: 2-4 weeks
While we strive to meet the estimated timelines, unforeseen factors may affect production and delivery schedules. We will make every effort to keep you updated throughout the process to ensure a smooth experience.
By placing an order, you agree to our terms and conditions, including any applicable production and shipping policies.
©2025. Amrocor All Rights Reserved.