The Amrocor AGS-1706D-E93TAG2 is a high-performance industrial generator set, engineered for standby, prime, and continuous power applications. It combines superior components, including a Perkins Engine, Stamford Alternator, and a Deepsea Control Panel, to ensure reliable and efficient power generation for a variety of industries.
Power Mode | Power Output | Speed | Overload Capability |
---|---|---|---|
Prime Power | 322 kW | 1800 RPM | 10% overload for 1 hour in 12 |
Standby Power | 354 kW | 1800 RPM | No overload permitted |
Specification | Detail |
---|---|
Model | 1706D-E93TAG2 |
Manufacturer | Perkins |
Number of Cylinders | 6 Cylinders Inline |
Cycle | 4-Stroke |
Aspiration | Turbocharged and Aftercooled |
Bore x Stroke | 105 mm x 149 mm |
Displacement | 9.3 L |
Compression Ratio | 16.5:1 |
Prime Power / Speed | 322 kW / 1800 RPM |
Standby Power / Speed | 354 kW / 1800 RPM |
Speed Governor | ECM |
Cooling System | Forced Liquid Cooling Cycle |
Total Coolant Capacity | 36 L |
Fuel Consumption (75% Load) | 218 g/kW h |
Starter Motor | DC24V |
Specification | Detail |
---|---|
Model | UCI274 CSA Approved |
Output Power | 315 kW |
Frequency | 60 Hz |
Exciter Type | Single Bearing, Brushless, Self-Excited |
Power Factor | 0.8 |
Voltage Regulation | ≤+1% |
Insulation Grade | H |
Protection Grade | IP23 |
Phase | 3 |
Specification | Detail |
---|---|
Model | DSE |
Monitoring Parameters | Generator voltage, output frequency, engine speed, battery voltage, engine hours |
Failure Indicators | Overspeed, emergency stop, low oil pressure, high water temperature, failure to start |
Shutdown Triggers | Low engine oil pressure, high water temperature, overspeed, failure to start after 3 attempts |
The Amrocor AGS-1706D-E93TAG2 industrial generator set is engineered to provide efficient, reliable, and long-lasting power in a variety of critical applications. Its advanced features and compliance with industry standards ensure dependable operation for industrial, commercial, and emergency use.
We process all orders within 24 hours of confirmation. Production times vary depending on the product and specific order requirements. To receive the most accurate lead time, please email us before placing your order so we can provide detailed information.
As a general guideline, estimated production times are as follows:
Oil: 6-8 weeks
Generators: 16-20 weeks
Transformers: 8-12 weeks
Switchgears: 8-12 weeks
Industrial Equipment: 8-12 weeks
Wiring & Cables: 2-4 weeks
While we strive to meet the estimated timelines, unforeseen factors may affect production and delivery schedules. We will make every effort to keep you updated throughout the process to ensure a smooth experience.
By placing an order, you agree to our terms and conditions, including any applicable production and shipping policies.
©2025. Amrocor All Rights Reserved.