$0.00
Amrocor Industrial Generator Sets are highly reliable and efficient power generation systems, ideal for providing consistent and dependable electrical power in a range of applications, including standby, prime, and continuous power. Powered by Perkins Engine, Stamford Alternator, and Deepsea Control Panel, these systems are designed for maximum performance and durability.
Specification | Details |
---|---|
Model | 2806F-E18TAG1 |
Manufacturer | Perkins |
Number of Cylinders | 6 Cylinders |
Cycle | 4 Stroke |
Aspiration | Turbocharged and Air-to-Air Chargecooled |
Bore x Stroke | 145 x 183 mm |
Displacement | 18.1 L |
Compression Ratio | 16:1 |
Prime Power/Speed | 501 kW / 1800 rpm |
Standby Power/Speed | 555 kW / 1800 rpm |
Speed Governor | ECM |
Cooling System | Forced Liquid Cooling |
Lubrication Capacity | 74 L |
Fuel Consumption (75% Load) | 126.7 L/h |
Starter Motor | DC 24V |
Specification | Details |
---|---|
Model | HCI544C |
CSA Approved | Yes |
Power Output | 500 kW |
Frequency/Speed | 60 Hz / 1800 rpm |
Exciter Type | Single Bearing, Brushless, Self-Excited |
Power Factor | 0.8 |
Voltage Adjustment Range | ≥5% |
Voltage Regulation | ≤+1% |
Insulation Grade | H |
Protection Grade | IP23 |
Phase | 1 |
Feature | Details |
---|---|
Model | DSE |
Digital Readouts | Generator Voltage, Frequency, Engine Speed, Battery Voltage, Engine Hours Run |
Failure Indicators | Overspeed, Low Oil Pressure, High Water Temperature, Emergency Stop |
Automatic Shutdowns | Low Oil Pressure, High Water Temperature, Overspeed, Failure to Start after Three Attempts |
Amrocor Industrial Generator Sets deliver dependable and high-performance power solutions, tailored for various industries that require reliable power in standby, prime, or continuous settings.
We process all orders within 24 hours of confirmation. Production times vary depending on the product and specific order requirements. To receive the most accurate lead time, please email us before placing your order so we can provide detailed information.
As a general guideline, estimated production times are as follows:
Oil: 6-8 weeks
Generators: 16-20 weeks
Transformers: 8-12 weeks
Switchgears: 8-12 weeks
Industrial Equipment: 8-12 weeks
Wiring & Cables: 2-4 weeks
While we strive to meet the estimated timelines, unforeseen factors may affect production and delivery schedules. We will make every effort to keep you updated throughout the process to ensure a smooth experience.
By placing an order, you agree to our terms and conditions, including any applicable production and shipping policies.
©2025. Amrocor All Rights Reserved.