$99,000.00 Original price was: $99,000.00.$94,050.00Current price is: $94,050.00.
Amrocor industrial generator sets are fully integrated power generation systems that provide optimum performance, dependability, and versatility for standby power, prime power, and continuous power applications.
Attribute | Value |
---|---|
Model | TAD1651GE |
Manufacturer | Volvo |
Number of Cylinders | 6 Cylinders Inline |
Cycle | 4 Stroke |
Aspiration | Turbocharged & Charge Air-Cooled |
Bore x Stroke (mm x mm) | 144 x 165 |
Displacement | 16.12 L |
Compression Ratio | 16.5:1 |
Prime Power with Fan / Speed | 496 kW/1800rpm |
Standby Power with Fan / Speed | 546 kW/1800rpm |
Speed Governor | ECM |
Cooling System | Forced Liquid Cooling Cycle |
Steady Speed Drop | ≤1% |
Total Lubrication System Capacity | 48 L |
Coolant Capacity | 45 L |
Fuel Consumption at 100% Load | 201 g/kW.h |
Starter Motor | DC24V |
Alternator | DC24V |
Attribute | Value |
---|---|
Alternator Model | HCI544C (CSA Approved) |
Power | 500 kW |
Frequency/Speed | 60Hz/1800rpm |
Exciter Type | Single Bearing, Brushless, Self-excited |
Power Factor | 0.8 |
Voltage Adjust Range | ≥5% |
Voltage Regulation NL-FL | ≤+1% |
Insulation Grade | H |
Protection Grade | IP23 |
Phase | 3 |
Attribute | Value |
---|---|
Model | DSE |
Digital Displays | Generator voltage, Output frequency, Engine speed, Battery voltage, Engine hours run |
Indicators for Failures | Overspeed/underspeed, Emergency stop, Low oil pressure, High water temperature, Failure to start, Battery charger failure |
Automatic Shutdown Triggers | Low engine oil pressure, High engine water temperature, Overspeed/underspeed, Failure to start after three attempts |
Amrocor Industrial Generator Sets are ideal for various applications including:
We process all orders within 24 hours of confirmation. Production times vary depending on the product and specific order requirements. To receive the most accurate lead time, please email us before placing your order so we can provide detailed information.
As a general guideline, estimated production times are as follows:
Oil: 6-8 weeks
Generators: 16-20 weeks
Transformers: 8-12 weeks
Switchgears: 8-12 weeks
Industrial Equipment: 8-12 weeks
Wiring & Cables: 2-4 weeks
While we strive to meet the estimated timelines, unforeseen factors may affect production and delivery schedules. We will make every effort to keep you updated throughout the process to ensure a smooth experience.
By placing an order, you agree to our terms and conditions, including any applicable production and shipping policies.
©2025. Amrocor All Rights Reserved.