Amrocor Industrial Generator Sets are state-of-the-art, fully integrated power systems that ensure optimum performance, reliability, and versatility across a range of applications including standby, prime, and continuous power. Powered by Perkins Engines, Stamford Alternators, and Deepsea Control Panels, these generators are engineered for seamless operation and long-lasting performance.
Specification | Details |
---|---|
Model | 2506C-E15TAG4 |
Manufacturer | Perkins |
Number of Cylinders | 6 Cylinders |
Cycle | 4 Stroke |
Aspiration | Turbocharged & Air-to-Air Chargecooled |
Bore x Stroke | 137 x 171 mm |
Displacement | 15.2 L |
Compression Ratio | 16:1 |
Prime Power/Speed | 597 kW / 1800 rpm |
Standby Power/Speed | 623 kW / 1800 rpm |
Speed Governor | ECM |
Cooling System | Forced Liquid Cooling Cycle |
Lubrication System Capacity | 62 L |
Fuel Consumption at 100% Load | 146 L/h |
Starter Motor | DC24V |
Specification | Details |
---|---|
Model | HCI544C |
CSA Approved | Yes |
Power Output | 550 kW |
Frequency/Speed | 60 Hz / 1800 rpm |
Exciter Type | Single Bearing, Brushless, Self-Excited |
Power Factor | 0.8 |
Voltage Adjust Range | ≥5% |
Voltage Regulation | ≤+1% |
Insulation Grade | H |
Protection Grade | IP23 |
Phase | 3 |
Feature | Details |
---|---|
Model | DSE |
Digital Readouts | Generator Voltage, Output Frequency, Engine Speed, Battery Voltage, Engine Hours Run |
Failure Indicators | Overspeed, Low Oil Pressure, High Water Temperature, Emergency Stop |
Automatic Shutdowns | Low Oil Pressure, High Water Temperature, Overspeed, Failure to Start After Three Attempts |
Amrocor Industrial Generator Sets provide unmatched performance and reliability, making them the preferred choice for industries that demand consistent and long-lasting power solutions.
We process all orders within 24 hours of confirmation. Production times vary depending on the product and specific order requirements. To receive the most accurate lead time, please email us before placing your order so we can provide detailed information.
As a general guideline, estimated production times are as follows:
Oil: 6-8 weeks
Generators: 16-20 weeks
Transformers: 8-12 weeks
Switchgears: 8-12 weeks
Industrial Equipment: 8-12 weeks
Wiring & Cables: 2-4 weeks
While we strive to meet the estimated timelines, unforeseen factors may affect production and delivery schedules. We will make every effort to keep you updated throughout the process to ensure a smooth experience.
By placing an order, you agree to our terms and conditions, including any applicable production and shipping policies.
©2025. Amrocor All Rights Reserved.