$32,000.00 Original price was: $32,000.00.$30,400.00Current price is: $30,400.00.
The Amrocor AGS-TAD550GE is a top-tier industrial generator set built for standby, prime, and continuous power applications. Featuring a Volvo Penta Engine, Stamford Alternator, and Deepsea Control Panel, it provides unmatched reliability and efficiency in a wide range of power generation scenarios.
Power Mode | Power Output | Speed | Overload Capability |
---|---|---|---|
Prime Power | 85 kW | 1800 RPM | 10% overload for 1 hour in 12 |
Standby Power | 93 kW | 1800 RPM | No overload permitted |
Specification | Detail |
---|---|
Model | TAD550GE |
Manufacturer | Volvo Penta |
Number of Cylinders | 4 Cylinders |
Cycle | 4-Stroke |
Aspiration | Wastegate Turbocharger |
Bore x Stroke | 108 mm x 130 mm |
Displacement | 4.76 L |
Compression Ratio | 18:1 |
Prime Power / Speed | 85 kW / 1800 RPM |
Standby Power / Speed | 93 kW / 1800 RPM |
Speed Governor | ECM |
Cooling System | Forced Liquid Cooling Cycle |
Lubrication System Capacity | 13 L |
Fuel Consumption at 100% Load | 218 g/kW h |
Starter Motor | DC24V |
Specification | Detail |
---|---|
Model | UCI224 CSA Approved |
Output Power | 75 kW |
Frequency | 60 Hz |
Exciter Type | Single Bearing, Brushless, Self-Excited |
Power Factor | 0.8 |
Voltage Regulation | ≤+1% |
Insulation Grade | H |
Protection Grade | IP23 |
Phase | 1 |
Specification | Detail |
---|---|
Model | DSE |
Monitoring Parameters | Generator voltage, output frequency, engine speed, battery voltage, engine hours run |
Failure Indicators | Overspeed, emergency stop, low oil pressure, high water temperature, failure to start |
Shutdown Triggers | Low engine oil pressure, high water temperature, overspeed, failure to start after 3 attempts |
The Amrocor AGS-TAD550GE generator set is an advanced solution for demanding industrial and commercial applications, offering reliable power, low maintenance, and efficient operation.
We process all orders within 24 hours of confirmation. Production times vary depending on the product and specific order requirements. To receive the most accurate lead time, please email us before placing your order so we can provide detailed information.
As a general guideline, estimated production times are as follows:
Oil: 6-8 weeks
Generators: 16-20 weeks
Transformers: 8-12 weeks
Switchgears: 8-12 weeks
Industrial Equipment: 8-12 weeks
Wiring & Cables: 2-4 weeks
While we strive to meet the estimated timelines, unforeseen factors may affect production and delivery schedules. We will make every effort to keep you updated throughout the process to ensure a smooth experience.
By placing an order, you agree to our terms and conditions, including any applicable production and shipping policies.
©2025. Amrocor All Rights Reserved.