$32,000.00 Original price was: $32,000.00.$30,400.00Current price is: $30,400.00.
The Amrocor Prime Power Diesel Generator is engineered to provide optimal performance, reliability, and versatility for a wide range of applications including standby, prime, and continuous power needs. This industrial generator set is powered by a Volvo Penta Engine, with a Stamford Alternator, and features an advanced Deepsea Control Panel for seamless operation.
Power Mode | Power Output | Voltage | Frequency | Phase |
---|---|---|---|---|
Prime Power | 85 kW | 208/120V | 60 Hz | Three-Phase |
Standby Power | 93 kW | 208/120V | 60 Hz | Three-Phase |
Specification | Detail |
---|---|
Model | TAD550GE |
Manufacturer | Volvo Penta |
Number of Cylinders | 4 Cylinders |
Cycle | 4-Stroke |
Aspiration | Wastegate Turbocharger |
Bore x Stroke | 108 mm x 130 mm |
Displacement | 4.76 L |
Compression Ratio | 18:1 |
Prime Power / Speed | 85 kW / 1800 RPM |
Standby Power / Speed | 93 kW / 1800 RPM |
Cooling System | Forced Liquid Cooling Cycle |
Fuel Consumption at 100% Load | 218 g/kW h |
Specification | Detail |
---|---|
Model | UCI224 CSA Approved |
Power | 75 kW |
Frequency | 60 Hz |
Exciter Type | Single Bearing, Brushless, Self-Excited |
Power Factor | 0.8 |
Voltage Regulation | ≤+1% |
Insulation Grade | H |
Protection Grade | IP23 |
Phase | 3 |
Specification | Detail |
---|---|
Model | DSE |
Monitoring Parameters | Generator voltage, output frequency, engine speed, battery voltage, engine hours run |
Failure Indicators | Overspeed, emergency stop, low oil pressure, high water temperature, failure to start |
Shutdown Triggers | Low engine oil pressure, high water temperature, overspeed, failure to start after 3 attempts |
The Amrocor Prime Power Diesel Generator offers powerful, durable, and efficient performance for diverse power applications, ensuring continuous and uninterrupted power supply in critical situations.
We process all orders within 24 hours of confirmation. Production times vary depending on the product and specific order requirements. To receive the most accurate lead time, please email us before placing your order so we can provide detailed information.
As a general guideline, estimated production times are as follows:
Oil: 6-8 weeks
Generators: 16-20 weeks
Transformers: 8-12 weeks
Switchgears: 8-12 weeks
Industrial Equipment: 8-12 weeks
Wiring & Cables: 2-4 weeks
While we strive to meet the estimated timelines, unforeseen factors may affect production and delivery schedules. We will make every effort to keep you updated throughout the process to ensure a smooth experience.
By placing an order, you agree to our terms and conditions, including any applicable production and shipping policies.
©2025. Amrocor All Rights Reserved.